|
|
Post by artdecovampire on Jan 29, 2015 1:35:54 GMT -5
Several people have asked so you may wish to know that the volcanic base half for Allosaurus and the footprint half is now available. You can do an e bay search or
Order from Mark Kreis Dyttoad1@yahoo.com
|
|
|
|
Post by pbbass3313 on Jan 29, 2015 9:56:49 GMT -5
Saw the white cast version on e-Bay, but not the "flickering" - is it ready for orders also?
|
|
|
|
Post by artdecovampire on Jan 29, 2015 16:24:39 GMT -5
Hi PB, Just the white one at the moment, but mark is working on the flickering one and it should be available soon. We have had several enquiries about the plane one so Mark decided to use the mold initially to pull white ones. Flickering one soon as the special resin arrives. This clear resin he uses cures badly in the current cold damp weather.
|
|
|
|
Post by TAY666 on Jan 29, 2015 17:59:28 GMT -5
Yeah. Clear resins are notoriously fickle.
If conditions aren't just right, they do bad things. Fog, craze, bubble, not cure properly, etc.
It's probably the damp, more than the cold that causes the problem. Humidity can be an issue for almost any resin, but clear is especially susceptible.
|
|
